Cisco Aironet 1000 Series 업그레이드 - 페이지 4

{카테고리_이름} Cisco Aironet 1000 Series에 대한 업그레이드을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 1000 Series 28 페이지. Install and upgrade internal modules and field replaceable units
Cisco Aironet 1000 Series에 대해서도 마찬가지입니다: 배포 매뉴얼 (40 페이지), 매뉴얼 (20 페이지)

페이지 인쇄

External Modules

Step 1

Read the Safety Warnings and disconnect the power supply before you perform any module replacement.

Step 2

Confirm the router is turned off and disconnected from the power supply.

Step 3

Disconnect all port cables connected to the router. Ensure that you do not work on the router with cables still attached to

the router in the event of lightning or surges.

Step 4

Place the chassis on a flat surface.

Step 5

Align hooks on the cover to slots on the chassis base and lower the cover onto chassis base.

Step 6

Slide the cover from the I/O side to the bezel side

Step 7

Install the fourteen screws on both sides of the chassis. Torque to 6-8 in-lbs.

External Modules

This section describes how to install external modules and FRUs in the Cisco 1000 Series Integrated Services

Routers. The information is contained in the following sections:

Warning

Locate External Slots for Modules

This section describes the locations of external modules on the router motherboard.

Install and Upgrade Internal Modules and Field Replaceable Units

Only trained and qualified personnel should be allowed to install, replace or service this equipment. Statement

1030.

Install and Upgrade Internal Modules and Field Replaceable Units