Cisco Cisco Access Registrar 4.2 네트워크 설정 구성 - 페이지 2
{카테고리_이름} Cisco Cisco Access Registrar 4.2에 대한 네트워크 설정 구성을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Cisco Access Registrar 4.2 34 페이지. Telepresence conference system
Cisco Cisco Access Registrar 4.2에 대해서도 마찬가지입니다: 사용자 설명서 (44 페이지), 시작하기 매뉴얼 (46 페이지)
페이지 인쇄
Configuration Methods
Configuration Methods
Accessing Network Settings through a Phone
Configuration Web Page
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
4-2
Table 4-1
describes the methods that you can use to configure network settings for
a Cisco Unified IP Phone.
Table 4-1
Methods for Configuring Network Settings
Cisco Unified IP Phone
7905G and 7912G
This chapter describes how to use the Phone Configuration web page and the
Network Configuration menu to configure most network settings for the
Cisco Unified IP Phone. For more information about using the Phone
Configuration web page for configuration, see
Configuration Methods and Parameters."
system for configuration, see
and Parameters."
Related Topics
•
Accessing Network Settings through a Phone Configuration Web Page,
page 4-2
Accessing Network Configuration Settings through the Network
•
Configuration Menu, page 4-4
You can view and set network configuration options for a Cisco Unified IP Phone
7905G and 7912G from the Phone Configuration web page for that phone. To set
options in this web page, you must first use the UIPassword parameter in the
phone profile file to set up a password. If you do not set up a password, you will
not be able to change network settings, and Apply will not be available.
For more information about the UIPassword parameter, see
page
A-23.
Chapter 4
Configuring Network Settings on the Cisco Unified IP Phone
Configuration Methods
Use the Phone Configuration web page
•
Use the phone Network Configuration menu
•
For information about using the IVR
Appendix A, "Additional Configuration Methods
Appendix A, "Additional
Table A-8 on
OL-8617-01