Cisco Cius 매뉴얼 - 페이지 6

{카테고리_이름} Cisco Cius에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Cius 15 페이지.
Cisco Cius에 대해서도 마찬가지입니다: 개요 (26 페이지), 매뉴얼 (19 페이지)

Headsets

Parameter

Parity

Stop

Flow control

Note

Because Cisco Cius comes preloaded with drivers, Cisco supports only a limited number of cable types.

Cisco recommends using IOGEAR USB-serial adapter.

Use USB console

The USB console cable has a USB interface on one end and a serial interface on the other. The USB interface

may be plugged in to any of the three USB ports on Cisco Cius. The serial interface connects to the serial port

on the PC.

If you do not have a serial port on your PC/laptop, two USB console cables can be connected back to

Tip

back, with a Null modem cable between them.

To use a USB console, use the following procedure.

Procedure

Step 1

In Cisco Unified Communications Manager, set credentials on device page.

Step 2

Enable USB debugging under Product Specific Configuration window.

Step 3

Connect a USB serial cable to Cisco Cius. Cisco Cius console output appears on your terminal screen.

Step 4

After output stops, tap <Return> to sign in.

Step 5

Step 6

After $ prompt screen, you can use tools such as debugsh to diagnose Cisco Cius problems.

For information on troubleshooting the USCB console, see the

Headsets

Although Cisco performs internal testing of third-party headsets for use with Cisco Cius, Cisco does not certify

or support products from headset or handset vendors.

Cisco Cius reduces some background noise that is detected by a headset microphone, but if you want to further

reduce the background noise and improve the overall audio quality, use a noise-canceling headset.

Cisco Cius Administration Guide, Release 9.2(4)

Setting

none

1 bit

none

Troubleshooting USB

Setting Up Cisco Cius

Console.

OL-27284-01