Cisco EX90 사용자 설명서 - 페이지 14

{카테고리_이름} Cisco EX90에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco EX90 50 페이지. Telepresence system
Cisco EX90에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 (37 페이지), 사용자 설명서 (49 페이지), 빠른 참조 매뉴얼 (2 페이지), 시작하기 매뉴얼 (42 페이지), 사용자 설명서 (45 페이지), 설치 매뉴얼 (6 페이지), 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 (7 페이지), 문제 해결 매뉴얼 (37 페이지), 설치 매뉴얼 (2 페이지), 사용자 설명서 (45 페이지), 사용자 설명서 (37 페이지), 시작하기 매뉴얼 (46 페이지)

페이지 인쇄

Cisco TelePresence System EX60 & EX90

Table of Contents

Creating a video conference

(MultiSite)—EX90 only

If your EX90 is equipped with the optional MultiSite

feature, you may call more than one to initiate a video

conference.

The MultiSite feature allows you to call three other

systems on video plus a fourth system on audio only

(for example a mobile phone).

This means that the conference can consist of up to

four video participants (yourself included) and one

audio participant.

If you want to initiate a video conference, you must

call each participant one by one.

Call settings. Those you call may have video systems

with different capabilities. One or more of them may,

for example, be on an ADSL system with limited

bandwidth (compared to the others). You may then

set the Call settings to a (normally lower) call rate

suiting his or her system before you call that person.

However, that call rate will affect that specific part of

the video conference only. Other participants will not

experience a lower call rate because of this.

D1501601 User guide EX60 & EX90

Getting started

Video meetings

Scheduled meetings

Place a call to the first

participant.

Call the next

participant in the usual

way.

Repeat the procedure from

, if

needed.

A maximum four video systems

(yourself included) and one audio call

may participate.

If you initiated the conference you will be able to terminate the entire conference as well.

The other participants, however, may only disconnect themselves from the conference.

Managing Contacts

The Settings

Once you are

in the call, tap Add.

Tap Add to place the second

call, initiating a conference. You

may adjust Call Settings before

you place the call, if needed.

Tap END to terminate the

conference.

User guide