ACU-RITE 754 빠른 설정 매뉴얼 - 페이지 2

{카테고리_이름} ACU-RITE 754에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ACU-RITE 754 2 페이지. Wireless weather and atomic clock station

ABOUT THE ATOMIC CLOCK:

The main unit has a special receiving device that picks up an AM radio signal broadcasted by the National Institute of Standards and

Technology (NIST) in Fort Collins, Colorado. The signal is generated from the official U.S. atomic clock that is the most accurate

timekeeping device in the world! The AM radio signal transmits the exact hour, minute and second of the day. The main unit

automatically seeks for the time signal once a day (2:00am) to update to the exact time. Like a typical AM radio, the atomic clock feature

will not able to receive the signal in places surrounded by heavy concrete or metal panels. The reception of the time signal is also greatly

affected by electrical or electronic interference. To get the best performance, place the main unit near a window.

Daylight Saving Time (DST):

The atomic clock will automatically adjust to DST and back to standard time. The feature is set to "ON" during the initial set up to make

the time change. For areas not practicing DST in summer, hold the HOUR button for 3 seconds to turn it "OFF".

Manual Search for Atomic Time

If the unit has not automatically caught the daily atomic time signal within 24 hours, hold the SET button and release to activate the signal

search. The tower icon will begin to flash. The "OK" icon will appear next to the tower once the signal is received.

** Note when the unit is searching for the time signal, if the tower base is only flashing, the unit is in a weak reception area. If the tower

base and all signal waves are flashing, the reception is better.

Manual setting for Time:

To Set Clock: Hold the SET button and press: HR to adjust hour, MIN to adjust minute.

To set Calendar:

• Hold the DATE button for 3 seconds and use the MINUTE (-) and HOUR (+) to adjust up and down.

• The Year will begin to flash; adjust to correct year; press DATE to confirm.

• The Month will begin to flash; adjust to correct month; press DATE to confirm.

• The Date will begin to flash; adjust to correct date; press DATE to confirm & exit.

Setting the Alarm Time:

Hold "AL" button on the back of the unit and press the HOUR button to set hour

Hold "AL" button and press the MINUTE to set minute

Press "AL" button to view alarm time setting

To Select Alarm Modes:

Slide the alarm switch to:

OFF = Alarm Off

Bell = Daily Alarm (press SNOOZE/ LIGHT button on right side of unit to stop alarm for 1 day)

Zz = Snooze Alarm (press SNOOZE/ LIGHT for 10 minutes repetitive alarm, press any button to stop alarm for 1 day)

BEST RECEPTION LOCATIONS:

Some electronic appliances, such as computers, TV's, fluorescent lights, microwave ovens, power lines, and metal siding walls can

interfere with the time and temperature signal transmissions to the main unit. Try to place each unit at least 3 feet from these objects or

near a window for optimum performance.

Signal:

LIMITED WARRANTY: Should this product from the Chaney Instrument Co., prove to be

defective in material or workmanship within one year of original purchase, it will be repaired

or replaced. This warranty does not cover damage in shipment or failure caused by

tempering, carelessness, or abuse.

LAKE GENEVA, WISCONSIN 53147