Cisco ICS-7750 운영 매뉴얼 - 페이지 7
{카테고리_이름} Cisco ICS-7750에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ICS-7750 32 페이지. Hewlett-packard network router installation guide
Chapter 5
Operating the Cisco ICS 7750
Determining the ICS System Manager Version
Determining the Cisco IOS Software Release Running on the SSP
Step 1
Step 2
Step 3
Step 4
78-14165-03
The ICS System Manager bundle version number is displayed on the System
Manager home page, in a box just under the graphic representation of the system
chassis.
For example:
Software Bundle:
V<version number>
Running since:
<date and time ICS System Manager was last restarted>
The ICS System Manager home page also lists the cards currently running in the
system chassis, as well as their assigned IP addresses and the software running on
each. You can switch between a summary view and a detailed view of the
hardware and software installed on the cards in the system.
You can use ICS System Manager to determine the Cisco IOS software release
that is running on the SSP, as well as other information about the SSP, as follows:
Click the Configure tab on the ICS System Manager home page.
Click SSP Manager.
If prompted, log in as an administrator (user ID administrator), and enter your
password (the default is changeme).
Click show tech-support.
The system invokes the show version command on the SSP. The following is
sample output from this command:
Cisco Internetwork Operating System Software
IOS (tm) C2900XL Software (C2900XL-C3H2S-M), Version 12.0(5.2)XU,
MAINTENANCE INTERIM SOFTWARE
Copyright (c) 1986-2000 by Cisco Systems, Inc.
Additional output lines from the show version command include information
such as the processor revision numbers and the amount of available memory.
Cisco ICS 7750 Installation and Configuration Guide
Accessing the System
5-7