ACU-RITE 825 사용 설명서 - 페이지 4

{카테고리_이름} ACU-RITE 825에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ACU-RITE 825 15 페이지. Deluxe weather station forecaster with wireless wind and temperature sensors

페이지 인쇄

SECTION 3 • PLACEMENT

Now that setup is complete, you must choose a location to place the 3

wireless sensors and the main unit. The wireless sensors MUST be

placed LESS THAN 100 feet away from the main unit.

This wireless weather station uses radio frequency for communication,

which is susceptible to interference from other electronic devices and

large metallic items or thick walls. Always place both units at least 3 feet

away from appliances ( TV, microwave, radios, etc. ) or objects ( large

metal surfaces, thick stone walls, etc. ) that may interfere with the

wireless communication.

WIND

MAIN

UNIT

Placement of Main Unit

DST

TIMEZONE

OFF ON

PST MST CST EST

WIND GUST

MAX

INDOOR

MIN

mph

kph

knots

FUTURE FORECAST

MAX

MIN

OUTDOOR

WIND SPEED

MIN

MAX

PRESSURE

HISTORY

mph

kph

WIND CHILL

hPa

InHg

HR.

knots

Place the main unit in a dry area free of dirt and dust. To help ensure

an accurate indoor temperature measurement, be sure to place the

main unit out of direct sunlight, and away from any heat sources or

vents in your home.

There are 2 placement options for the main unit. You may hang the

main unit on a wall using the integrated hang hole on the back.

Alternatively, you may place the main unit on a table top or other flat

surface utilizing the removable main unit display stand.

Placement of Sensors

The wireless sensors MUST BE PLACED OUTDOORS to observe

outdoor weather conditions and relay them to the main unit display.

The wireless sensors must be placed less than 100 feet from the

main unit.

TEMP.

& HUMIDITY

- 6 -

Wireless Wind Sensor

PLACEMENT

1. Attach the wind sensor to the

mounting bracket by simply

sliding into the bracket.

2. The sensor must be mounted

with the bracket pointing NORTH

as indicated on the bracket and

on the top surface of the wind sensor itself. The wireless wind sensor

should be mounted high above all potential wind obstructions for

maximum performance, keeping in mind it must remain within the 100

ft. wireless range of the main display unit.

Attach to a solid surface utilizing screws and wall anchors (if applicable).

Depending on the mounting surface, other steps may need to take place

to ensure the sensor is mounted successfully.

Wireless Temperature

& Humidity Sensor

PLACEMENT

1. Attach to a solid vertical OR

horizontal surface out of direct

sunlight for maximum

performance. Attach the

mounting bracket utilizing the

included screws and wall

anchors (if applicable).

Depending on the mounting

surface, other steps may need

to be taken to ensure the

sensor is mounted securely.

2. Attach the temperature &

humidity sensor to the

mounting bracket by simply

sliding into the bracket.

VERTICAL

SURFACE

HORIZONTAL

SURFACE

- 7 -