Cable Electronics CE LABS HSW88C 사용 설명서 - 페이지 4

{카테고리_이름} Cable Electronics CE LABS HSW88C에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cable Electronics CE LABS HSW88C 11 페이지. 8x8 hdmi over cat5 matrix with ir pass-through

페이지 인쇄

FEATURES

• State-of-the-art Silicon Image (Founder of HDMI) chipset embedded

for upmost compatibility and reliability

• HDMI 1.3c compliant

• HDCP compliant

• Allows any source to be displayed on multiple displays at the same time

• Allows any HDMI display to view any HDMI source at any time

• Supports 7.1 channel digital audio

• Supports default HDMI EDID and learns the EDID of displays

• The matrix switch master can switch every output channel to any

HDMI input by push button, IR remote control, USB port or RS-232 control

• Allows control of local HDMI sources such as DVD and TiVo

extender through control path at remote receiver

• Allows control of main matrix switch through control line at remote

receiver

• Extends video signal up to 35m (115 feet) over CAT5e at 1080p and

likely longer with better HDMI source device (such as PS3

grade HDMI display (such as Sony X-series HDTV

solid CAT6 cable

• Easy installation with rack-mounting and wall-mounting designs for

master and receiver respectively

• Fast response time – 2~5 seconds for channel switch

The length depends on the characteristics and quality of the

cables. Higher resolutions and longer transmission distances

require low skew cables (<25ns/100m) for best performance.

Unshielded CAT6 with metal RJ-45 connectors is recommended

TiVo is a registered trademark of TiVo Inc.

PS3 is a registered trademark of Sony Computer Entertainment.

Sony X-series HDTV is a registered trademark of Sony Electronics Inc.

by IR

), better

), and better quality

2. Setting button:

Press Get button to read back device ID.

Press Set button to write device ID.

3. Linkage button:

Press Linkage button to read back all status.

4. Open/Close button:

Press this button to close or open COM port.

5. Mapping button:

Select All Output:

Select "set all output", then select the

source on main menu. You can quickly set

all outputs to the same source.

Unselect All Output:

Release output selection.

Select Input1~8-Output:

Select Input Source. Then select the

output port icon.

For example:

Select input source 1. Then select output

port one and two. The video and audio

will be send to ports one and two.

6. Fast Select button:

Press Fast select button. Quick setting.

Input one > Output Port one

Input two >Output Port two

.....

Press Fast select pull down menu.

Select Input Num-Output Num

Input source #1 > Output port #1

Input source #2 > Output port #2

.....

Select Input* - All Output

Send the same source to all outputs.