Filtropur FC-3000 소유자 매뉴얼 - 페이지 16

{카테고리_이름} Filtropur FC-3000에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Filtropur FC-3000 20 페이지. Commercial model

Troubleshooting – continued

Removing Jams from Roller Brush

If an object becomes trapped in the Filtropur roller brush, the unit will

automatically shut off the power foot motor and the RED circuit breaker

button located on the power foot will pop up protecting your Filtropur

vacuum power foot motor.

1. Turn the unit off by pressing the main power switch to the "OFF" [O]

position, press the roller brush switch to the "OFF" [O] position and unplug

the power cord from the outlet.

2. Remove object from roller brush.

3. Press to reset the RED circuit breaker

button on the power foot, reinsert power cord

to outlet and turn unit back on by pressing

the main and roller brush switches to the

"ON" position and continue vacuuming.

If materials such as soot, cement, plaster dust, copy

machine powder, etc. are picked up, the filter cone

surface may seal and cause the airflow to be restricted to

the motor. This will activate the pressure relief valve to

avoid over heating. You may hear a whistling sound

from the motor, experience a loss of suction, or

expelling debris from the front of the power foot,

indicating you have clogged your system. Please shut

down unit, empty the dirt container, replace filters, and

remove visible clog. Empty dirt container and replace

filters. Check and clear any clogs in hose or access

plate or junction plate at top of machine. After

changing the filters and/or removing clogs, the motor

will have cooled and the Filtropur vacuum will be ready

for continued use.