Cisco MX Series 시작하기 매뉴얼 - 페이지 29

{카테고리_이름} Cisco MX Series에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco MX Series 33 페이지. Telepresence video systems
Cisco MX Series에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (41 페이지), 시작하기 매뉴얼 (34 페이지), 시작하기 매뉴얼 (42 페이지), 시작하기 매뉴얼 (46 페이지)

페이지 인쇄

Cisco TelePresence Video Systems



Introduction

Date, time and location

(When not set by a provisioning system)

We recommend you check that the date and time settings

are correct when you set up your video conference system.

The system uses this information for example to time stamp

messages transmitted to gatekeepers and other network

elements.

You can find the time in the top right corner of the Touch

controller display.

D15318.02 Video Systems Getting Started Guide CE8.1, APRIL 2016.

User interfaces

Web interface

1. Tap the user name in the upper left corner and tap

Settings > Administrator > Date, Time &

2. Tap

24h

3. Tap dd.mm.yy,

Format

4. Select the

your system. Step through the list of available zones by

tapping

5. Set

Date & Time Mode

to be automatically updated; otherwise, select Manual.

a. If you select Manual, enter the correct value for

Hour, Minute, Year, Month, and Day. Tap

decrease or increase a value.

b. If you select Auto, the NTP server address can be

automatically obtained from the network (set the

NTP Mode

address yourself (set

6. Tap

Save

without saving.

7. Tap

Exit

On-screen setup assistant

Location.

12h

to select the

Time Format

you prefer.

mm.dd.yy

yy.mm.dd

to select the

you prefer.

Time Zone Area

and

Time Zone Location

Auto

if you want time and date

and

to Auto) or you can enter the

NTP Server

NTP Mode

to Manual).

to confirm the changes, or

Undo

to leave

to return to the home menu.

Touch

Date

for

Getting Started Guide

Appendices