Cisco MX Series 시작하기 매뉴얼 - 페이지 27

{카테고리_이름} Cisco MX Series에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco MX Series 34 페이지. Telepresence video systems
Cisco MX Series에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (41 페이지), 시작하기 매뉴얼 (33 페이지), 시작하기 매뉴얼 (42 페이지), 시작하기 매뉴얼 (46 페이지)

페이지 인쇄

Cisco TelePresence Video Systems



Introduction

Provisioning set-up

(When using a provisioning system)

Start the Provisioning Wizard

Tap the user name in the upper left corner, and tap Settings.

Tap

Administrator > Provisioning

and then Start.

NOTE:

When you start up a system for the first time, the

setup assitant, which covers provisioning, starts automatically.

Choose provisioning infrastructure

Choose one of the following supported provisioning systems:

• Cisco UCM (Unified Communications Manager)

• Cisco UCM via Expressway

• Cisco VCS (Video Communication Server)

Tap

to proceed.

D15318.03 Video Systems Getting Started Guide CE8.2, JUNE 2016.

User interfaces

Web interface

Enter required parameters

Enter the parameters required for the chosen provisioning

infrastructure. Then tap

Cisco UCM

Contact your UCM provider to get the IP address or DNS

name of the Cisco UCM

You can find more details about setting up Cisco UCM provi-

sioning in the

Cisco UCM via Expressway**

Upon ordering this service, you have received a Username,

Domain

and Passphrase. Enter those in the corresponding

input fields.

Setup assistant

to complete the procedure.

(External

Manager).*

Administering CE endpoints on CUCM

Touch

In some cases, you must manually enter the Expressway

address. Select

Manually override Expressway

enter the address you have received upon ordering in the

External Manager

field.

Cisco VCS

Contact your VCS provider to get the IP address or DNS

guide

name of the Cisco VCS

Domain.*

If required, set the

Username

cating the video system with the provisioning server.

Have a look at the

Cisco VCS provisioning

more information on VCS provisioning.

* The DHCP server can be set up to provide the External Manager address

automatically (DHCP Option 150). Any input set up here overrides the

setting provided by DHCP.

**For CUCM via Expressway to show up as provisioning option for your

video system, you must have the encryption option key installed.

Getting Started Guide

Appendices

address, and

(External

Manager) and the SIP

and

Passphrase

for authenti-

appendix for