Cisco MX Series 시작하기 매뉴얼 - 페이지 30
{카테고리_이름} Cisco MX Series에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco MX Series 34 페이지. Telepresence video systems
Cisco MX Series에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (41 페이지), 시작하기 매뉴얼 (33 페이지), 시작하기 매뉴얼 (42 페이지), 시작하기 매뉴얼 (46 페이지)
페이지 인쇄
Cisco TelePresence Video Systems
Introduction
Date, time and location
(When not set by a provisioning system)
We recommend you check that the date and time settings
are correct when you set up your video conference system.
The system uses this information for example to time stamp
messages transmitted to gatekeepers and other network
elements.
You can find the time in the top right corner of the Touch
controller display.
D15318.03 Video Systems Getting Started Guide CE8.2, JUNE 2016.
User interfaces
Web interface
1. Tap the user name in the upper left corner and tap
Settings > Administrator > Date, Time &
2. Select your prefered time and date format, and set
accurate time zone.
3. Set
Date & Time Mode
to be automatically updated; otherwise, select Manual.
a. If you select Manual, enter the correct value for
Hour, Minute, Year, Month, and Day. Tap
decrease or increase a value.
b. If you select Auto, the NTP server address can be
automatically obtained from the network (set the
NTP Mode
address yourself (set
4. Tap
Save
without saving.
5. Tap
Exit
Setup assistant
Location.
to
Auto
if you want time and date
-
and
to Auto) or you can enter the
NTP Server
NTP Mode
to Manual).
to confirm the changes, or
Undo
to leave
to return to the home menu.
30
Touch
Touch
+
to
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
Getting Started Guide
Appendices