Cisco MX Series 시작하기 매뉴얼 - 페이지 28
{카테고리_이름} Cisco MX Series에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco MX Series 42 페이지. Telepresence video systems
Cisco MX Series에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (41 페이지), 시작하기 매뉴얼 (33 페이지), 시작하기 매뉴얼 (34 페이지), 시작하기 매뉴얼 (46 페이지)
페이지 인쇄
Cisco TelePresence Video Systems
Contents
Setting the system/codec
password
You need a user name and a password to sign in to the web
and command line interfaces of your system.
the video conference system is delivered with a default user
account with the user name
admin
and no password set. this
user has full access rights to the system.
A warning on the screen of your video system indicates if no
administrator password is set. to remove the warning you
must set an administrator password.
NoTe:
We strongly recommend that you set a password for
the
admin
user to restrict access to system configuration.
Make sure to keep a copy of the password in a safe
You have to contact your Cisco representative if you have
forgotten the password.
1. Click your user name in the upper right corner and select
Change
password.
2. enter the
Current
password, the
New
the new password in the appropriate input fields.
the password format is a string with 0–64 characters.
if a password is not currently set, use a blank
password.
3. Click
Change
password.
If you are changing a value setting,
you have to always click
save
to confirm the change.
Back to task overview
D14639.09 Video Systems Getting Started Guide TC6.1, April 2013.
Introduction
User interfaces
Setting the menu password
initially, no menu password is set to restrict access to the
Administrator menus on the touch controller and the remote
control.
You need to enter this password to configure the video system
using a touch controller or a remote control.
the Administrator Settings menu password cannot be set
using the touch controller.
NoTe:
We strongly recommend that you define a password to
protect the Administrator Settings menu, since these settings
affect the behavior of the video conference system.
1. Go to the
2. Click the text
place.
in the upper right corner.
3. enter the menu password in the
4. Click
Save
5. the link text in the upper right corner should now be
password, and repeat
Administrator Settings menu
Current
Confirguration
Configuration
Configuration
tab and select
System
Configuration.
Set Administrator Settings menu password
Password
field.
to confirm the change.
Change
password.
28
Getting Started Guide
Appendices
Contacts
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.