Sony 49WD755 사용 설명서 - 페이지 10

{카테고리_이름} Sony 49WD755에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony 49WD755 40 페이지.

페이지 인쇄

Connecting TV to the Internet

Setting up the Internet

Connection

To use the network features of your TV it needs

to be connected to the Internet. The set-up

procedure differs depending on the type of

network and LAN router. Before setting up the

Internet connection, be sure to set up a LAN

router. Check your wireless LAN environment

using the following chart.

Wireless LAN

Secure Wireless LAN?

YES m

Do you use a wireless LAN

router compatible with Wi-Fi

Protected Setup™ (WPS)?

YES m

Type 1*

Wired LAN , Type 4

* Type 1 is easier to set up if your router has an

automatic setting button, e.g. Air Station One-Touch

Secure System (AOSS). Most of the latest routers have

this function. Check your router.

Type 1: Follow the configuration for Secured

network with Wi-Fi Protected Setup™

(WPS).

Type 2: Follow the configuration for Secured

network without Wi-Fi Protected

Setup™ (WPS).

Type 3: Follow the configuration for Unsecured

network with any type of wireless

LAN router.

Type 4: Follow the configuration for Wired

network set-up.

k Type 3

k Type 2

Type 1: Secured network with Wi-Fi

Protected Setup™ (WPS)

The WPS standard makes security of a wireless

home network as straightforward as pressing

the WPS button on the wireless LAN router.

Before setting up a wireless LAN, check the

location of the WPS button on the router and

verify how to use it.

For security purpose, [WPS (PIN)] provides a PIN

code for your router. PIN code is renewed every

time you select [WPS (PIN)].

Press HOME, then select [Settings] 

[System Settings]  [Set-up] 

[Network]  [Network Set-up].

IP Address setting/Proxy server:

– automatic setting:

[Set up network connection]  [Easy]

– manual setting:

[Set up network connection]  [Expert] 

[Wired Set-up] or [Wireless Set-up]

Select [WPS (Push Button)] for Push

Button method or [WPS (PIN)] for PIN

method.

Note

Button name of the WPS may differ depending on

the router (e.g. AOSS button).

Follow the instructions on the set-up

screen.

Note

• If you use WPS for network set-up, the security

settings of the wireless LAN router activate, and any

equipment previously connected to the wireless LAN

in a non-secure status will be disconnected from the

network.

In this case, activate the security settings of the

disconnected equipment and then reconnect. Or, you

can deactivate the security settings of the wireless

LAN router, and then connect the equipment to a TV

in a non-secure status.

• To use the network with IPv6, select [Settings] 

[System Settings]  [Set-up]  [Network]  [IPv6/

IPv4 Priority]  [IPv6], then select [Easy] in [Set up

network connection].

• When IPv6 is selected, HTTP Proxy cannot be set.