DigiTech BASS DRIVER 매뉴얼 - 페이지 6

{카테고리_이름} DigiTech BASS DRIVER에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DigiTech BASS DRIVER 12 페이지. Bass overdrive/distortion

4. Blend Knob

Controls the dry/distortion mix. Blending in dry signal helps maintain

the bottom end that is usually lost when using a standard overdrive or

distortion stompbox. At the Blend knob's minimum position, only dry

signal is heard. At the Blend knob's maximum position, only distortion

signal is heard. Experimenting with different Blend and Morph knob

settings provides tremendous flexibility in the overall distortion sound.

5. Morph Knob

Morphs the three different distortion sounds. The minimum position is

a light overdrive tone. The 12 o'clock position is a warm fat distortion

sound. The maximum position is a classic high gain fuzz that will push

your bass tone over the edge when you need it. Experiment with

different Morph and Blend knob settings to hear the wide variety of

sounds the Bass Driver is capable of creating.

6. Input Jack

Connect your instrument to this jack. Connecting a 1/4" instrument

cable to this jack engages battery power even though the Indicator LED

may not be lit. To prolong battery life, disconnect all cables from the

pedal when not in use.