DigiTech Bass Squeeze 사용자 정보 설명서 - 페이지 10

{카테고리_이름} DigiTech Bass Squeeze에 대한 사용자 정보 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DigiTech Bass Squeeze 12 페이지. Dual band bass compressor

Sample Settings

Thick Bottom

1. Using the tip of a 1/4"cable, push one of the release pins in on either

side of the pedal, and remove the pedal from the pedal chassis.

2. Remove the battery from the battery compartment and disconnect

the battery cable.

3. Connect a new battery to the battery cable and put it back in the

battery compartment. Make sure the battery cable does not interfere

with the spring or pedal switch arm.

4. Place one hole of the pedal over its corresponding pin.

5. Push the opposite pin in and lower the other side of the pedal into

place over the depressed pin. Release the pin. When the pedal is

properly fastened, both released pins are flush with the outer side of

the pedal.

Glass Top

Mild Compression