Cisco MX300 G2 시작하기 매뉴얼 - 페이지 31
{카테고리_이름} Cisco MX300 G2에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco MX300 G2 46 페이지.
Cisco MX300 G2에 대해서도 마찬가지입니다: 설치 (7 페이지), 설치 (7 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지)
페이지 인쇄
Cisco TelePresence Video Systems
Contents
Provisioning set-up
(When using a provisioning system)
If your system is automatically provisioned, the IP and provi-
sioning settings are automatically configured. To keep the
automatic settings, skip these stages on the Setup assistant.
Start the Setup assistant
Navigate to the user name in the upper left corner, and select
Settings. Select
Setup assistant.
Navigate to
selecting Next.
NOTE:
When you start up the SX10 for the first time, the
Setup assistant starts automatically.
Choose provisioning infrastructure
Choose one of the following supported provisioning systems:
• CUCM (Cisco Unified Communications Manager)
• CUCM via Expressway
• VCS (Video Communication Server)
* The DHCP server can be set up to provide the Host server address
automatically (DHCP Option 150). Any input set up here overrides the
setting provided by DHCP.
Back to task overview
D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014.
Introduction
User interfaces
CUCM
Contact your UCM administrator to get the information needed.
Enter IP address or DNS name in the
and select
⎷
You can find more details about setting up Cisco UCM provi-
sioning in the
Provisioning
by
CUCM via Expressway
Contact your UCM administrator to get the information needed.
Enter Username,
input fields. Always select
Apply
to save.
In some cases, you must manually enter the Expressway
address. Select
enter the address you have received upon ordering in the
Host Server Address
VCS
Contact your VCS provider to get the information needed.
1. Enter IP address or DNS name of the Cisco VCS and
select
⎷
2. Enter the Username, and Password, if required, for
authenticating the video system with the provisioning
server. Select
3. Enter SIP
4. Select
Apply
Have a look at the
more information on VCS provisioning.
Configuration
Configuration
Host server address
to confirm the change*. Select
Apply
to save.
Administering TC endpoints on CUCM
Password
and
Domain
in the corresponding
to confirm the changes. Select
⎷
Manually override Expressway
address, and
field.
to confirm the change.
⎷
to confirm the change
Domain
and select
to confirm the change.
⎷
to save the changes.
Cisco VCS provisioning
appendix for
31
Appendices
field,
guide.
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
Getting Started Guide
Contacts