Cisco Profile Series 설치 매뉴얼 - 페이지 21

{카테고리_이름} Cisco Profile Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Profile Series 44 페이지. Jbod on the 12g sas modular raid controller
Cisco Profile Series에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (41 페이지), 사용자 설명서 (44 페이지), 사용자 설명서 (7 페이지), 시작하기 매뉴얼 (35 페이지), 빠른 참조 매뉴얼 (2 페이지), 구성 매뉴얼 (13 페이지), 설치 시트 (2 페이지), 설치 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (4 페이지), 빠른 시작 매뉴얼 (4 페이지), 설치 매뉴얼 (16 페이지), 시작하기 매뉴얼 (32 페이지), 매뉴얼 (16 페이지), 시작하기 매뉴얼 (42 페이지), 시작하기 매뉴얼 (46 페이지)

Installing the Router

This chapter describes the equipment and the procedures for successfully installing the Cisco 800M

Series ISR, and contains the following sections:

Equipment, Tools, and Connections, page 2-2

•

Installing the Router, page 2-3

Note

For compliance and safety information, see

800 Series

Routers.

Read the installation instructions before connecting the system to the power source. Statement 1004

Warning

This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the

Warning

absence of a suitably installed ground conductor. Contact the appropriate electrical inspection

authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024

Warning

Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

Statement 1030

No user-serviceable parts inside. Do not open. Statement 1073

Warning

Ultimate disposal of this product should be handled according to all national laws and regulations.

Warning

Statement 1040

Warning

Read the wall-mounting instructions carefully before beginning installation. Failure to use the

correct hardware or to follow the correct procedures could result in a hazardous situation to people

and damage to the system. Statement 378

C H A P T E R

Regulatory Compliance and Safety Information for Cisco

Cisco 800M Series Integrated Services Router Hardware Installation Guide

2-1