Cisco Profile Series 설치 매뉴얼 - 페이지 24

{카테고리_이름} Cisco Profile Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Profile Series 44 페이지. Jbod on the 12g sas modular raid controller
Cisco Profile Series에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (41 페이지), 사용자 설명서 (44 페이지), 사용자 설명서 (7 페이지), 시작하기 매뉴얼 (35 페이지), 빠른 참조 매뉴얼 (2 페이지), 구성 매뉴얼 (13 페이지), 설치 시트 (2 페이지), 설치 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (4 페이지), 빠른 시작 매뉴얼 (4 페이지), 설치 매뉴얼 (16 페이지), 시작하기 매뉴얼 (32 페이지), 매뉴얼 (16 페이지), 시작하기 매뉴얼 (42 페이지), 시작하기 매뉴얼 (46 페이지)

Installing on a Table

A four rubber feet is provided as part of the router hardware (shown in

table mount while ordering. Insert the rubber feet at the bottom of the router. Connect the chassis to a

reliable earth ground. Keep at least 200 mm of clear space on both left and right side for heat dissipation.

Figure 2-1

Two brackets and six counter-sunk screws are provided as part of the router hardware. These brackets

and screws can be used for both rack mount and wall mount and the brackets can be oriented in different

angles based on the need for wall mount and rack mount.

For wall mount, the supported configurations for the router are:

•

To mount the router on a wall, follow these steps:

Attach the two brackets to the chassis using the three screws provided for each bracket such that the

Step 1

brackets are facing the bottom of the router, as shown in

Orient the Cisco 800M Series router, facing the I/O side facing upwards as shown in

Step 2

the opposite direction such that the I/O side is facing downwards as shown in

Cisco 800M Series Integrated Services Router Hardware Installation Guide

2-4

Four Rubber Feet

I/O side facing upwards, as shown in

I/O side facing downwards, as shown in

Figure 2-2

Figure 2-3

Chapter 2

Installing the Router

Figure

2-1) if you have opted for

Figure

2-2, or in

Figure

2-3.