DigiTech Genesis 1 사용자 설명서 - 페이지 9

{카테고리_이름} DigiTech Genesis 1에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DigiTech Genesis 1 12 페이지. Genetx guitar processor
DigiTech Genesis 1에 대해서도 마찬가지입니다: 사용자 설명서 (12 페이지)

페이지 인쇄

Modulation

The Genesis1 has 3 modulation effects to choose from: Chorus,Tremolo,

and Phaser. Only one modulation effect can be selected at a time. The

Modulation button has a 3-color LED (Red, Green,Yellow) that indicates

the 3 different effects. Press the

LED color lights with the effect you want to use. Turn the knob clockwise

to increase the speed and intensity of each effect. For example:

CHORUS

- A Chorus adds a short delay to your signal. The delayed

signal is modulated in and out of tune and then mixed back with the origi-

nal signal to create a thicker sound. Turn the knob to increase the speed

and decrease the depth.

TREMOLO

- A Tremolo modulates the volume of the signal at an

even rate. Turn the knob to increase both speed and depth.

PHASER

- A Phaser splits the incoming signal, takes it in and out of

phase, and then mixes it back in with the original signal. Turn the knob to

increase the speed and decrease the regeneration (depth remains fixed).

To bypass the modulation, press the button until the LED goes off.

Delay/Reverb

The Genesis1 is equipped with both delay and reverb. Delay records a

portion of the incoming signal, and plays it back at a set time. Reverb

gives the listener a sense that the music is being performed in various

acoustical environments. Both delay and reverb can be used independent-

ly or they can be used together. The delay time is set with the TAP-IT

button. Press the button at the rate you want the delay to repeat.The

delay has a range of 100ms – 2.0 seconds. There are also 2 reverb types,

Spring and Hall. The reverb type is dependent on which amp model is

selected. Below is a list of reverb types associated with each model:

Black Face - Spring

Boutique - Hall

Rectified - Hall

Brit Stack - Hall

Tweed - Spring

Brit Combo - Spring

The Delay/Reverb has a TAP-IT button, with a flashing LED (Delay Time),

and a knob that adjusts Delay Level, Reverb Level, or Delay+Reverb Level.

The Delay/Reverb knob has 3 ranges. The first range selects only the

delay and controls the Delay Level. The second range selects only the

reverb and controls the Reverb Level. The third range selects both the

delay and reverb and controls both of their levels. To bypass the delay and

reverb, turn the knob fully counter-clockwise to the "OFF" position.

MODULATION

button until the

Fuzz - Hall

Hot Rod - Hall

High Gain - Hall

X™ Gain - Hall

X™ Crunch - Hall