Cisco SX series 시작하기 매뉴얼 - 페이지 19

{카테고리_이름} Cisco SX series에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SX series 34 페이지. Telepresence video systems
Cisco SX series에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (33 페이지), 시작하기 매뉴얼 (46 페이지)

페이지 인쇄

Cisco TelePresence Video Systems



Introduction

Passphrase

You need a user name and a passphrase to sign in to the web

and command line interfaces of your system. You also need the

system passphrase to access the administrator and advanced

settings on the Touch controller.

The video conference system is delivered with a default user

account with the user name

admin

and no passphrase set. This

user has full access rights to the system.

NOTE:

Initially, no passphrase is set for the default

It is mandatory to set a passphrase for any user with ADMIN

rights in order to restrict access to system configuration. This

includes the default admin user.

A warning, saying that the system passphrase is not set, is

shown on screen until you set a passphrase.

Make sure to keep a copy of the passphrase in a safe place.

You have to factory reset the unit, if you have forgotten the

passphrase.

D15318.03 Video Systems Getting Started Guide CE8.2, JUNE 2016.

User interfaces

Web interface

Set the system/codec passphrase

NOTE:

We strongly recommend that you set a passphrase for

the

admin

user to restrict access to system configuration.

1. Click your user name in the upper right corner, and select

Change

2. Enter the

admin

user.

repeat the new passphrase in the corresponding input

fields.

The passphrase format is a string with 0–64 characters.

If a passphrase is not currently set, use a blank space for

Current

3. Click

Change

Setup assistant

passphrase.

Current

passphrase, the

New

passphrase, and

passphrase.

Getting Started Guide

Touch

Appendices