Cisco SX series 시작하기 매뉴얼 - 페이지 13

{카테고리_이름} Cisco SX series에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SX series 46 페이지. Telepresence video systems
Cisco SX series에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (33 페이지), 시작하기 매뉴얼 (34 페이지)

페이지 인쇄

Cisco TelePresence Video Systems

Contents

Provisioning set-up

(When using a provisioning system)

Start the Provisioning Wizard

Tap the user name in the upper left corner, and tap Settings.

Tap

Administrator > Provisioning

and then Start.

NOTE:

When you start up a MX or EX system for the first time,

the Provisioning Wizard starts automatically.

Choose provisioning infrastructure

Choose one of the following supported provisioning systems:

• Cisco VCS (Video Communication Server)

• WebEx Telepresence (Not available for SX10)

• Cisco UCM (Unified Communications Manager)

• Cisco UCM via Expressway

Tap

to proceed.

Back to task overview

D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014.

Introduction

User interfaces

Enter required parameters

Enter the parameters required for the chosen provisioning infrastructure. Then tap

Cisco VCS

Contact your VCS provider to get the IP address or DNS name

of the Cisco VCS

required, the

video system with the provisioning server.

Have a look at the

information on VCS provisioning.

WebEx TelePresence

Upon ordering the Cisco WebEx Telepresence service, you have

received a

Video number

Please contact your company's WebEx Telepresence adminis-

trator, if you do not have a video phone number and an activation

code.

Configuration

(External

Manager), the SIP Domain, and, if

Username

and

Password

for authenticating the

Cisco VCS provisioning

appendix for more

and an

Activation

code.

Getting Started Guide

Appendices

to complete the procedure.

Cisco UCM

Contact your UCM provider to get the IP address or DNS name

of the Cisco UCM

(External

Manager).*

You can find more details about setting up Cisco UCM provi-

sioning in the

Administering TC endpoints on CUCM

Cisco UCM via Expressway

Upon ordering this service, you have received a Username,

Domain

and Password. Enter those in the corresponding input

fields.

In some cases, you must manually enter the Expressway

address. Tick the

Manually override Expressway

enter the address you have received upon ordering in the

External Manager

field.

* The DHCP server can be set up to provide the External Manager address

automatically (DHCP Option 150). Any input set up here overrides the

setting provided by DHCP.

Contacts

guide

address, and