Cisco SX80 설치 매뉴얼 - 페이지 4

{카테고리_이름} Cisco SX80에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SX80 7 페이지. With touchpad 10
Cisco SX80에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (2 페이지), 매뉴얼 (45 페이지), 매뉴얼 (45 페이지), 사용자 설명서 (19 페이지), 설치 매뉴얼 (24 페이지), 설치 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 설치 매뉴얼 (7 페이지), 참조 매뉴얼 (8 페이지), 시작하기 매뉴얼 (46 페이지)

Installation guide for Cisco TelePresence SX80

Connect a PC (optional)

Connect a PC to the codec, in order to share

content locally or with conference participants.

Cisco offers a PC presentation cable that

connects the codec's DVI-I input and Audio line

in port (Euroblock), to the PC's VGA and mini jack

connectors.

Alternatively, you can use a standard HDMI cable

(not provided).

PC, max 2

(DVI-I/Euroblock or HDMI)

Start using the system

Power (100-240 VAC, 50/60 Hz)

Always use the provided power cable.

The codec inlet or the wall socket outlet

must be easily accessible after installation.

Connect to power, then switch on the system.

Wait while the codec starts up. Normally this takes a few

minutes. It may include automatic software upgrade and

restart of Touch 10 and camera(s).

Follow the instructions on screen to set the language etc.

If your system is not set up to be automatically provisioned,

you must configure the system before you can make your

first call. This is described in the Getting Started Guide,

which is available at

http://www.cisco.com/go/sx-docs

Power

switch