Cisco TelePresence 매뉴얼 - 페이지 18

{카테고리_이름} Cisco TelePresence에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco TelePresence 24 페이지. Configuring a cisco unified communications manager sip trunk with a cisco telepresence content server
Cisco TelePresence에 대해서도 마찬가지입니다: 브로셔 (4 페이지), 사양 (7 페이지), 설치 매뉴얼 (4 페이지), 관리자 매뉴얼 (27 페이지), 빠른 참조 매뉴얼 (2 페이지), 설치 시트 (2 페이지)

페이지 인쇄

CUCM Integration with Content Server 6.2

Field

Connected Line ID

Presentation

Connected Name

Presentation

Called Party Transformations

Discard Digits

Called Party Transform

Mask

Prefix Digits (Outgoing

Calls)

ISDN Network-Specific Facilities Information Element

Network Service Protocol From the Network Service Protocol drop-down list box, choose the PRI

Cisco TelePresence Content Server Release 6.2.1 Administration and User Guide

3-32

Chapter 3

Configuring a Cisco Unified Communications Manager SIP Trunk with a Cisco TelePresence

Description

Cisco Unified Communications Manager uses connected line ID

presentation (COLP/COLR) as a supplementary service to allow or restrict

the called party phone number on a call-by-call basis.

Choose whether you want Cisco Unified Communications Manager to

allow or restrict the display of the connected party phone number on the

calling party phone display for this route pattern.

Choose Default if you do not want to change the connected line ID

presentation. Choose Allowed if you want to display the connected party

phone number. Choose Restricted if you want Cisco Unified

Communications Manager to block the display of the connected party

phone number.

CUCM uses connected name presentation (CONP/CONR) as a

supplementary service to allow or restrict the called party name on a

call-by-call basis.

Choose whether you want CUCM to allow or restrict the display of the

connected party name on the calling party phone display for this route

pattern.

Choose Default if you do not want to change the connected name

presentation. Choose Allowed if you want to display the connected party

name. Choose Restricted if you want Cisco Unified Communications

Manager to block the display of the connected party name.

From the Discard Digits drop-down list box, choose the discard digits

instructions that you want to associate with this route pattern. The discard

digits that display depend on the numbering plan that you choose from the

Numbering Plan drop-down list box.

Note

The called party transformation settings that are assigned to the

route groups in a route list override any called party transformation

settings that are assigned to a route pattern that is associated with

that route list.

Enter a transformation mask value. Valid entries for the NANP include the

digits 0 through 9; the wildcard characters X, asterisk (*), and octothorpe

(#); the uppercase characters A, B, C, and D; and blank. If the field is

blank, no transformation takes place. CUCM sends the dialed digits

exactly as dialed.

Enter prefix digits in the Prefix Digits (Outgoing Calls) field. Valid entries

for the NANP include the digits 0 through 9; the wildcard characters

asterisk (*) and octothorpe (#); the uppercase characters A, B, C, and D;

and blank.

Note

The appended prefix digit does not affect which directory numbers

route to the assigned device.

protocol that matches the protocol of the terminating gateway.