DigiTech Polara 소유자 매뉴얼 - 페이지 5

{카테고리_이름} DigiTech Polara에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DigiTech Polara 10 페이지. Reverb effect pedal

4. Decay Knob

Controls the length of time it takes for the reverb to fade out.

5. Input 1 (Mono)

Connect your instrument, the output of a pedal, or an amp effects send to this jack. Signals are

heard at both outputs when only the Input 1 (Mono) jack is used.

6. Indicator LED

Lights when the effect is turned on.

7. Input 2

Connect a second input to this jack for stereo operation. Inputs 1 and 2 are processed separately

through the Stereo Reverb effect then fed to Outputs 1 and 2 keeping true stereo separation

between channels.

8. Foot Switch

Turns the effect on and off.

9. Output 2

Connect this output to the input of a second guitar amplifier when a second amp is being used.

10. Output 1 (Mono)

Connect this output to the input of a single guitar amplifier or amp effects return.

11. Liveliness Knob

Controls the amount of high frequency response in the Reverb's effect signal.

12. Level Knob

Controls the reverb level.