DigiTech RP1000 설정 매뉴얼 - 페이지 4

{카테고리_이름} DigiTech RP1000에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DigiTech RP1000 12 페이지. Multi-effects switching system
DigiTech RP1000에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

MaC InSTaLLaTIon

Insert the DVD into your DVD drive. A new window will open.

Double-click the Cubase LE 4 for Mac oSX icon. A new windows will open.

Double-click the Cubase LE 4.mpkg icon and follow the on screen instruc-

tions to install Cubase LE 4.

3. CUBaSE SETUP

a. SET UP WInDoWS

When the USB Audio and MIDI drivers were installed, Windows may have automatically

selected them as your default audio and MIDI outputs. This means that your Windows

sounds will be sent to the RPxxx rather than your computer's sound card. We need to

check if these have been changed and return the settings to what they were before.

Select Start>Control Panel>Sounds and audio Devices (XP) or

Hardware and Sound (Vista).

Select the audio tab (XP) or Manage audio Devices (Vista).

Under Sound Playback>Default device (XP), or Playback (Vista), make

sure your computer's sound card is selected as the default device.

Under Sound Recording>Default device (XP), or Recording (Vista), make

sure your computer's sound card is selected as the default device.

Under MIDI Music Playback>Default device, open the pull-down menu and

make sure Microsoft GS Wavetable Synth is selected as the default device (XP

only).

B. CUBaSE

After the RPxxx is connected to your computer and powered on, open Cubase

LE 4, and go to Devices>Device Setup as shown below.

aUDIo anD MIDI (oPTIonaL)

LE 4 DEVICE SETUP foR WInDoWS