Cisco TelePresence DX80 빠른 참조 매뉴얼

{카테고리_이름} Cisco TelePresence DX80에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco TelePresence DX80 3 페이지. Touchscreen mbtelehealth a shared health service
Cisco TelePresence DX80에 대해서도 마찬가지입니다: 설치 매뉴얼 (6 페이지), 사용자 설명서 (48 페이지), 사용자 설명서 (48 페이지), 사용자 설명서 (33 페이지), 사용자 설명서 (40 페이지), 사용자 설명서 (14 페이지), 사용자 설명서 (40 페이지), 매뉴얼 (43 페이지), 설정 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 (8 페이지)

Quick

Reference

Guide

Turning On/Waking up the System

The Telehealth device is in standby if power button is flashing.

Touch anywhere on the screen to wake system from standby.

If the system is in standby, an incoming call will wake it automatically.

If power button light is off, press

Making a Call

Tap the screen anywhere to get the call option to appear.

Tap the 'Call' button.

Four Ways to Place a Call

1. Searching the Directory

Tap the 'Directory.'

Subfolders of all RHAs and NLCHI will appear.

The first two letters of the system name denotes region.

(e.g., LG.LC.4 is in Labrador-Grenfell Health.)

Tap the subfolder of the desired system.

Scroll through the listed systems and tap the desired system.

type the system or contact name in the 'Search' or 'Dial' field.

Tap the name of desired system.

Ensure the selected system is correct and tap the green 'Call' button.

2. Searching Recents

Tap 'Recents' on the call screen.

Scroll through the listed systems and tap the desired system.

Ensure the selected system is correct and tap the green 'Call' button.

3. Searching Favourites

Tap 'Favourites' on the call screen.

Scroll through the listed systems and tap the desired system.

Ensure the selected system is correct and tap the green 'Call' button.

4. Dialing Directly Using Search or Dial

Tap the 'Search' or 'Dial' field.

Type a dialstring using the touchscreen keyboard.

Once the address is entered tap the 'Call' button. Ensure you

have entered the dialstring correctly before calling.

Power Button

to turn on system.

DX80

May 2019