ACU-RITE 00606 사용 설명서 - 페이지 2
{카테고리_이름} ACU-RITE 00606에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ACU-RITE 00606 4 페이지.
페이지 인쇄(
SECTION 2 • SETUP
)
Battery Choice & Temperature Range
Extended periods of cold temperatures
I
below -4°F / -20°C
I
can cause alkaline
batteries to function improperly. This will cause the outdoor wireless sensor to
stop transmitting temperature readings. Use lithium batteries in these low
temperature conditions to ensure continued operation for wireless sensors placed
outdoors. NOTE: Rechargeable batteries are not recommended due to higher
operating voltages.
(70°C)
158°F
I
ALKALINE
BATTERIES
ltWIA·i
( 700C)
158°F
I
Install Batteries
NOTE: Install all batteries in both units within a 6 minute period to ensure proper
wireless functionality.
Always install batteries into the wireless sensor FIRST.
A. Wireless Sensor
0
INSTALL 2
"AA"
Remove the battery
0
REMOVE
•
BATTERIES
BATTERY
compartment cover.
COMPARTMENT
Install 2 fresh "AA"
COVER
batteries as shown
here.
Wireless Sensor
B. Main Unit
Remove the battery
0
REMOVE
0
INSTALL 2
"AAA"
compartment cover
BATTERY
BATTERIES
and install 2 fresh
COMPARTMENT
COVER
=AAAo
"AAA" batteries as
OAAA=
shown here.
Main Unit
- 2 -
Basic Setup is Now Complete
The wireless sensor will soon send a signal to the main unit and the two
units will be synchronized. It may take a few minutes for synchronization to
be complete. The wireless sensor signal icon on the display will show 1 to 4
"bars"
when the signal is received. If both or one of the units appear to be functioning
improperly, refer to the troubleshooting section in this manual.
Main Unit : Clock Set
After installing batteries into the Wireless Sensor and into the Main Unit, the
clock can be set.
TO SET THE CLOCK:
Press
and hold the
"SET"
button for 5 seconds to enter into CLOCK SET MODE.
Once in clock set mode, the preference you are currently setting will blink on the
display.
The preference set order is as follows:
CLOCK HOUR MODE (12 hour or 24 hour)
CLOCK HOUR
CLOCK MINUTE
To
adjust the currently selected (flashing) preference item, press the"+" button
to adjust up to the desired setting (press and HOLD to fast adjust). To
save your
adjustments, press the
"SET"
button again to move on to adjusting the next
preference.
You will automatically exit CLOCK SET MODE if no buttons are depressed for
:30
seconds. You may enter basic setup mode again at any time by pressing
and
holding the
"SET"
button.
Main Unit: MIN/MAX Memory
This wireless thermometer features a MIN/MAX memory feature which records
the MINIMUM and MAXIMUM indoor and outdoor temperature readings.
To view the MAX recorded temperature reading, press and release the
"MIN/MAX" button. Note the "MAX" icon on the display.
To view the MIN recorded temperature reading, press and release the
"MIN/MAX"
button again. Note the "MIN" icon on the display.
To
clear the MAX recorded values, press and hold the "MIN/MAX" button while
in the MAX view mode. Dashes will display in the temperature display to confirm
you have cleared the MAX values.
To clear the MIN recorded values, press and hold the "MIN/MAX" button while in
the MIN view mode. Dashes will display in the temperature display to confirm
you have cleared the MIN values.
- 3 -