DigiTech SCREAMINBLUES 매뉴얼 - 페이지 8

{카테고리_이름} DigiTech SCREAMINBLUES에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DigiTech SCREAMINBLUES 12 페이지. Overdrive/distortion

Connections

The Screamin' Blues has a single input (INPUT) and a pair of outputs

(AMP and MIXER). The two outputs give you the following options:

running into a guitar amplifier, running directly to a mixing console or

recording device, or both. The MIXER output uses DigiTech's speaker

cabinet compensation for an authentic guitar amplifier sound without

using an amp.

Follow these setup directions before use:

1.Turn the volume down on the amplifier/mixer you are connecting to.

2. Connect the pedal output to the amplifier/mixer input.

3. Connect the guitar to the pedal input.

4. Connect the power supply to the pedal (optional).

5.Turn the level control on the pedal to the minimum position.

6.Turn up your amplifier/mixer level to the desired listening level.

7.Turn on the pedal by pressing the pedal switch and gradually turn up

the level to the desired listening level.