Cisco TelePresence IX5200 설치 매뉴얼 - 페이지 25
{카테고리_이름} Cisco TelePresence IX5200에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco TelePresence IX5200 36 페이지.
Cisco TelePresence IX5200에 대해서도 마찬가지입니다: 빠른 시작 사용 설명서 (15 페이지), 사용자 설명서 (26 페이지), 최초 설정 (40 페이지)
페이지 인쇄
Installing the Cable Runner
2
a.
Slide the cable runner base into position under the lower center frame.
(3x per cable runner bracket) using a 6mm T-handle hex driver. Place the hex driver through the access
holes in the frame beam as required.
both brackets are resting on the lower part of the runner (not on the ribs).
c.
Lower the runner brackets through the cutouts in the runner until
a.
Slide the cable runner into
position
b.
c.
Lower the
brackets
b.
Loosen 3x
screws on
each side
Loosen the 6x hex screws
© 2015 Cisco Systems, Inc. All rights reserved.
Page 3-3