cable matters 103073 사용자 설명서 - 페이지 10

{카테고리_이름} cable matters 103073에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. cable matters 103073 12 페이지. 4 or 8 port hdmi splitter with 4k resolution support

페이지 인쇄

3.8 Troubleshooting Notes

Verify that the Splitter and all connected equipment have power. The green power



LED indicator should be lit on the Splitter.

Verify that all cables are connected to the correct input and output ports.



Verify that the correct video input is selected on the remote displays. The red LED



indicators are lit when a signal is detected.

Check the video resolution and aspect ratios to find a compatible setting. The



Splitter will automatically sync to the lowest common video resolution. All connect-

ed equipment that is active must support HDCP. Turn on each display separately

to test.

Directly connect the video source to the remote display to test that they are com-



patible (if possible).

Check the audio output settings from the source and the input settings of the re-



mote displays if the audio is not functioning. An A/V receiver may cause incompati-

bility problems if it is not HDCP compliant.

Test each HDMI by connecting it with other equipment.



High resolution 4K displays may require a heavier gauge AWG 22 to 24 HDMI



cables for distances over 15 feet to the Splitter.

A 'Not Supported' error message may indicate that the connected display does not



support HDCP (or more than 2 outputs) for content protected video.

Splitter does not support auto return (ARC) or HDMI over Ethernet (HEC)



Try to place the Splitter and cables away from fluorescent lights, air conditioners,



or machines that are likely to generate electrical noise.

Reboot the video source and output displays after making changes and allow them



some time to synchronize.

Contact [email protected] with any questions.

4 or 8 Port HDMI Splitter with 4K Support