Cisco TelePresence MX700 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} Cisco TelePresence MX700에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco TelePresence MX700 12 페이지. Single camera on a free standing floor stand or a floor stand secured to the wall
Cisco TelePresence MX700에 대해서도 마찬가지입니다: 설치 매뉴얼 (32 페이지), 설치 매뉴얼 (28 페이지), 설치 매뉴얼 (29 페이지), 설치 매뉴얼 (32 페이지), 빠른 참조 매뉴얼 (2 페이지), 매뉴얼 (45 페이지), 매뉴얼 (45 페이지), 설치 매뉴얼 (29 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 시작하기 매뉴얼 (46 페이지)

Cisco TelePresence MX700 빠른 시작 매뉴얼
Placing and Receiving Calls

Receive a Call

Use any of the following approaches to receive a call:
Receive Call while in another Call
If you are in a call, another incoming call may be answered.
Add: If your system is equipped with MultiSite you may merge
the incoming call with the existing. If MultiSite is not an option,
you can still merge the call but only as an audio call.
Answer & Hold Current: You can accept the incoming call
which will place the existing call on hold.
Answer & End Current: If you tap this option, you will accept
the incoming call and the current call will end.
Decline: Decline the incoming call and stay on the current call.
Incoming Call: Will show the name or number of the person
trying to call.
6
Quickstart Guide | Cisco Telepresence MX Series
Placing and Receiving Calls

Transfer Call

While in a call tap Transfer.
Locate who you wish to call in the usual way and press the
green Call icon.
Tap Complete transfer to complete the action.
Consult and Transfer
While in a call tap Hold.
Tap Place a New Call and locate whom to call. Place the call in
the usual way.
Once in the new call, tap Swap to go between the
two parties.
If you tap Transfer this will connect the two calls together
while you leave the call.
Disconnect from a Call
To disconnect from a call, tap End.
Mute Call
The mute button has an LED indicating whether the
microphone is on or muted. If the LED is green the
microphone is on.
Quickstart Guide | Cisco Telepresence MX Series
7