Cisco Telepresence MX800 교체 매뉴얼 - 페이지 30

{카테고리_이름} Cisco Telepresence MX800에 대한 교체 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Telepresence MX800 47 페이지. Wall-mounted mx800 single
Cisco Telepresence MX800에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (12 페이지), 설치 매뉴얼 (16 페이지), 교체 매뉴얼 (46 페이지), 설치 매뉴얼 (30 페이지), 예비 부품 (24 페이지), 설치 매뉴얼 (16 페이지), 빠른 참조 매뉴얼 (2 페이지), 매뉴얼 (45 페이지), 매뉴얼 (45 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 시작하기 매뉴얼 (46 페이지)

페이지 인쇄
Cisco Telepresence MX800 교체 매뉴얼
Cisco TelePresence MX800 Dual
Contents

Replace monitor (mounted on a stand)

The illustrations provided show how to replace the right monitor. The same steps
should be taken on the left monitor, when replacing the left monitor.
Step 1: Remove speaker grille, lower grille, loudspeakers and camera
Follow the steps described in
"Replace dual camera module"
22.
Note that you have to remove all loudspeakers that are mounted on the
monitor that you are replacing.
Step 2 (left monitor): Remove codec
Follow the steps described in
"Replace codec"
Step 2 (right monitor): Remove PoE injector
Follow the steps described in
"Replace PoE injector"
Step 3: Remove center covers
Follow the steps described in
"Replace center top profile, camera cover and center
back cover"
on page 11 to page 12.
Spare parts:
• Left monitor: CTS-MX800-MON-L-D=
• Right monitor: CTS-MX800-MON-R-D=
D15327.01 MX800 Dual Replacement Guide, MAY 2015.
Introduction
Grilles and covers
(page 1 of 7)
on page 16 to page
on page 24 to page 27.
on page 28 to page 29.
Speakers and cameras
4
90 kg / 200 lb
The monitor is heavy. We recommend
four people working together to replace
the monitor.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
30
Replacement Guide
Codec and monitors
Codec and monitors
Appendix