Cisco Telepresence MX800 설치 매뉴얼 - 페이지 9

{카테고리_이름} Cisco Telepresence MX800에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Telepresence MX800 30 페이지. Wall-mounted mx800 single
Cisco Telepresence MX800에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (12 페이지), 설치 매뉴얼 (16 페이지), 교체 매뉴얼 (46 페이지), 교체 매뉴얼 (47 페이지), 예비 부품 (24 페이지), 설치 매뉴얼 (16 페이지), 빠른 참조 매뉴얼 (2 페이지), 매뉴얼 (45 페이지), 매뉴얼 (45 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 시작하기 매뉴얼 (46 페이지)

페이지 인쇄
Cisco Telepresence MX800 설치 매뉴얼
Installation guide for Cisco TelePresence MX800 Dual - Floor stand
4
Secure floor stand
C
The system must be installed by qualified
personnel, in accordance with state and
local building regulations.
The wall and mounting hardware must be
able to safely support the product.
The wall brackets have two mounting positions.
1
Position the brackets the way that suits your
room the best.
94 mm / 3.70 in.
37 mm / 1.46 in.
Mounting positions, side view
78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.
Option B:
Use the wall brackets provided to secure the floor stand to the wall.
Option A (free standing with feet) is described on the previous page.
Mark the screw holes on the wall. The screws pass through
2
the horizontal slots on the wall bracket.
Hold the wall bracket towards the wall
and place the floor stand on the wall
bracket. Move them in place and mark
the screw holes on the wall. Repeat for
the other wall bracket.
Fasten each wall bracket in a secure
manner ensuring that the wall's structure
is sufficient to support the system
(screws/mounting hardware not provided;
not shown in illustration).
Fasten the floor stand to the wall brackets with
3
the four screws (provided).
4 ×
M6x12, pan
Front
Page 9