Cisco Telepresence MX800 설치 매뉴얼 - 페이지 7

{카테고리_이름} Cisco Telepresence MX800에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Telepresence MX800 16 페이지. Wall-mounted mx800 single
Cisco Telepresence MX800에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (12 페이지), 설치 매뉴얼 (16 페이지), 교체 매뉴얼 (46 페이지), 교체 매뉴얼 (47 페이지), 설치 매뉴얼 (30 페이지), 예비 부품 (24 페이지), 빠른 참조 매뉴얼 (2 페이지), 매뉴얼 (45 페이지), 매뉴얼 (45 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 시작하기 매뉴얼 (46 페이지)

페이지 인쇄
Cisco Telepresence MX800 설치 매뉴얼
Installation guide for Cisco TelePresence MX800 - Floor stand
2
Secure floor stand
B, G
The system must be installed by qualified
personnel, in accordance with state and
local building regulations.
The wall and mounting hardware must be
able to safely support the product.
The wall bracket has two mounting options.
1
Position the bracket the way that suits your
room the best.
94 mm / 3.7 in.
Side view
78-100219-02A0 | JUNE 2016 | © 2016 Cisco Systems, Inc. All rights reserved.
Option B:
Use the wall bracket provided to secure the floor stand to the wall
Option A (free standing with feet) is described on the previous page.
37 mm / 1.5 in.
Side view
Place the floor stand in the wall bracket and
2
move the floor stand with the wall bracket
into position. Mark the required screw hole
positions on the wall.
The wall bracket can be fastened through any
of the horizontal slots.
Fasten the bracket in a secure manner
ensuring that the wall's structure is sufficient
to support the system (screws/mounting
hardware not provided; not shown in
illustration).
Fasten the floor stand to
3
the wall bracket with the
two screws (provided).
Page 7
2 ×
M6x12, pan
Front
http://www.cisco.com/go/mx-docs