Cisco Telepresence MX800 매뉴얼 - 페이지 43

{카테고리_이름} Cisco Telepresence MX800에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Telepresence MX800 45 페이지. Wall-mounted mx800 single
Cisco Telepresence MX800에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (12 페이지), 설치 매뉴얼 (16 페이지), 교체 매뉴얼 (46 페이지), 교체 매뉴얼 (47 페이지), 설치 매뉴얼 (30 페이지), 예비 부품 (24 페이지), 설치 매뉴얼 (16 페이지), 빠른 참조 매뉴얼 (2 페이지), 매뉴얼 (45 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 시작하기 매뉴얼 (46 페이지)

Control of blinds

Table of contents

You can either use a spinner, or up and down arrows from the Icons tab in the

widget library.

Introduction

Create a user interface

API for in-room control

Widgets

Command reference

Troubleshooting

Tips and tricks

Examples

Consider the following strategy:

• Tilt the slides as response to a short press on a direction arrow. If tilted all

the way, move the blinds up or down incrementally.

• As response to a long press on a direction arrow, start moving the blinds in

that direction. They do not stop until all the way up or down.

• Short press any button in order to stop the movement after a long press.

Then no separate stop button is necessary.

D15358.01 APRIL 2016

Collaboration Endpoint software

version 8.1

Use a button only to send a signal

A button can be used just to send a signal, without changing the button's state

or visual appearance.

As an example, use the All lights on button to switch on all lights. Do not change

the button's color from gray to blue, but update the other light controls to reflect

the true status of the room.

A button that does not change color

(from gray to blue) when used