Cisco TelePresence Profile 42 시작하기 매뉴얼 - 페이지 8

{카테고리_이름} Cisco TelePresence Profile 42에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco TelePresence Profile 42 42 페이지. Telepresence ex, mx, quick set c20, codec c, sx20 quick set, profile series video systems
Cisco TelePresence Profile 42에 대해서도 마찬가지입니다: 설치 (2 페이지)

페이지 인쇄

Cisco TelePresence Systems

GettinG started Guide

Table of contents

Introduction

How to configure your system

Before you can start using your video conference system

you must set the basic configurations as described in this

chapter.

About user roles, user accounts and passwords

System/codec password

You need ADMIN rights to configure the system via web.

User roles: A user must possess one or a combination

of several

user

roles. Three user roles exist, representing

different rights: ADMIN, USER and AUDIT. It is important to

note that these roles have

non-overlapping

A complete administrator user account with full access

rights, like the default

admin

user, must possess all the three

roles.

User interfaces

Using a provisioning system, or configuring each

video conference system individually

Provisioning allows video conferencing network

administrators to manage many video systems

simultaneously. In general, you only have to input the

credentials of the provisioning server to each video system;

the rest of the configuration is done automatically.

Without a provisioning system, you must configure each

video system individually. As a minimum, you must set the IP

and SIP/H.323 parameters. You should also set the correct

time and date.

Basic configuration with or without a provisioning system is

described in the remainder of this chapter.

NoTE:

Initially, no password is set for the default

user. We strongly recommend that you set a password for

this user, and any other user possessing an ADMIN role, to

restrict access to system configuration.

rights.

You can read more about how to create and manage user

accounts in the Administrator guide for your product.

Configuration

Appendices

admin

Different user interface

We describe how to configure the video system using

either the Touch controller, the remote control or the web

interface.

We also describe how to set the menu password using the

command line interface.

The descriptions are marked with the following colors.

touch controller

remote control ...

Web interface

Command line ...

Menu password

NoTE:

Initially, no menu password is set. We strongly

recommend that you set a menu password to restrict access

to the Administrator menus on the Touch controller and

remote control.

You need to enter this password to be able to configure the

video system using a Touch controller or remote control.