Cisco TelePresence Profile 52 시작하기 매뉴얼 - 페이지 19

{카테고리_이름} Cisco TelePresence Profile 52에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco TelePresence Profile 52 42 페이지. Telepresence ex, mx, quick set c20, codec c, sx20 quick set, profile series video systems

페이지 인쇄

Cisco TelePresence Systems

GettinG started Guide

Table of contents

Introduction

remote control and on-screen menu

Provisioning set-up

(when using a provisioning system)

If in doubt for any of the parameters below, contact your

provisioning system provider.

See the Administrator guide for your product to find more

information about the provisioning settings.

Select provisioning infrastructure

1. Go to

Home > Settings > Administrator settings >

Advanced configuration > Provisioning > Mode

select a provisioning infrastructure:

• TMS – Cisco TelePresence Management System

• VCS – Cisco Video Communication Server

(only available for EX and MX series)

• Callway – Cisco TelePresence Callway

• CUCM – Cisco Unified Communications Manager

If you select Off, all configurations must be set manually

on the video system.

Always save the new value when you change a

setting

• Drop down list selection: Navigate to the correct

value and press the

( )

key to save, or press

the left arrow key

to leave without saving.

• Text entry in an input field: Enter the text, navigate

Ok/Save

to save the change, or navigate to

Cancel

to leave without saving; then press the

( ) key

to confirm.

Back to task overview

User interfaces

Configuration

Set the required provisioning parameters

Which parameters to set depend on which infrastructure was selected.

TMS

1. Go to

Home > Settings > Administrator settings

> Advanced configuration > Provisioning >

ExternalManager.

2. Enter the IP address or DNS name of the Cisco TMS

and

server in the

Address

3. Enter the

Path

to the provisioning service in the

corresponding input

field.

4. It may be required to authenticate the video system

with Cisco TMS. If so, go back to

> Administrator settings > Advanced configuration >

Provisioning,

and enter

respective input fields.

VCS (for EX and MX Series only)

1. Go to

Home > Settings > Administrator settings

> Advanced configuration > Provisioning >

ExternalManager.

2. Enter the IP address or DNS name of the Cisco VCS in

the

Address

input field.

3. Enter the SIP

Domain

corresponding input

field.

4. It may be required to authenticate the video system

with Cisco VCS. If so, go back to

> Administrator settings > Advanced configuration >

Provisioning,

and enter

respective input fields.

Have a look at the

Cisco VCS provisioning for MX and

EX Series

appendix for more information about VCS

provisioning.

Appendices

input field.

Home > Settings

LoginName

and

Password

in the

for the Cisco VCS in the

Home > Settings

LoginName

and

Password

in the

Callway

Upon ordering the Cisco TelePresence Callway service, you

have received a

Video number

and an

Activation

Please send an e-mail to

[email protected]

have a video phone number and an activation code.

1. Go to

Home > Settings > Administrator settings >

Advanced configuration > Provisioning

2. Enter the Video number in the

LoginName

3. Enter the Activation code in the

Password

CUCM

1. Go to

Home > Settings > Administrator settings

> Advanced configuration > Provisioning >

ExternalManager.

2. Enter the IP address or DNS name of the UCM

provisioning server in the

Address

input field

You can find more details about setting up Cisco UCM

provisioning in the Administering TC endpoints on CUCM

guide.

The DHCP server can be set up to provide the External Manager

address automatically (Option 242 for TMS; Option 150 for UCM).

Any input in the input field will override the setting provided by

DHCP.

code.

if you don't

input

field.

input

field.