Argo Glamour 사용 설명서 - 페이지 12

{카테고리_이름} Argo Glamour에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Argo Glamour 13 페이지.

(7) "FAN" BUTTON

Press "FAN" to start the Ventilation mode.

(8) "HEAT" BUTTON

Press "HEAT" to start the heating mode.

(9) "COOL" BUTTON

Press "COOL" to start the refrigeration mode.

(10) "DRY" BUTTON

Press "DRY" to start the dehumidification mode.

Note: Only when temperature reaches 16°C can we turn on the dehumidification mode, besides, the drain pipe must be

installed.

WARNING!

Before carrying out any cleaning or maintenance operations, unplug the appliance.

1. Cleaning the air filters

Use a vacuum cleaner to remove the dust from the filters.

Should this not suffice, wash the filter with lukewarm water

and some neutral detergent (if necessary), then rinse it

thoroughly in cold water and leave it to dry in air before

putting it back in place. Once the filter has been replaced,

close the grille and resume use of the air conditioner.

V 12/16

CARE AND MAINTENANCE

The air filters must be checked at least once every two weeks

of use. Operating the appliance with dirty or clogged filters will

decrease the air conditioner's efficiency and may cause

serious problems.

To remove filter 1, detach the grille by pressing the upper fin.

To remove filter 2, detach the grille by pressing the upper fin.