Sony 10001 설치 매뉴얼 - 페이지 22

{카테고리_이름} Sony 10001에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony 10001 28 페이지. A/v multiplexer board, a/v demultiplexer board
Sony 10001에 대해서도 마찬가지입니다: 설치 매뉴얼 (50 페이지)

페이지 인쇄
Sony 10001 설치 매뉴얼
1-5. Information of BKPF-206
1-5-4. Location and Function of Switches/
LEDs
AVD-11 board
1
2
3
4
5
6
7
8
1
1
1
1 D351 and D352 : AES/EBU AUDIO DETECT
1
indicators
These indicators indicate the existence of an audio data
in SDI signal. They light in green when the audio data
exists.
D351
Group 1
1/2 CH
Group 2
5/6 CH
Group 3
9/10 CH
Group 4
13/14 CH
2
2 D353 and D354: AUDIO ERROR indicators
2
2
2
These indicators indicate the error of an audio data in
SDI signal. They light in red when the audio data is
not in synchronization with an audio clock.
D353
Group 1
1/2 CH
Group 2
5/6 CH
Group 3
9/10 CH
Group 4
13/14 CH
1-18(E)
9
!/
Component side (A side)
D352
3/4 CH
7/8 CH
11/12 CH
15/16 CH
D354
3/4 CH
7/8 CH
11/12 CH
15/16 CH
3
3
3 S202 : Mode set switch (4-poles DIP switch)
3
3
Factory settings : All "OFF" side
S202-1 : D1/D2 system select switch
This switch selects the system of the video signal.
D1 : 4 : 2 : 2 component serial digital video signal
D2 : 4fsc composite serial digital video signal
S202-2 and S202-3 :
Audio group select switches
These switches select the group number of the audio
data detected from an SDI signal.
Audio
S202-2
Group
(GP SEL 1)
Group 1
OFF
Group 2
ON
Group 3
OFF
Group 4
ON
Group 1 :
The audio data CH 1 through CH 4 in SDI signal
which the DID is set to audio group 1 are detected and
output them as analog audio signal.
Group 2 :
The audio data CH 5 through CH 8 in SDI signal
which the DID is set to audio group 2 are detected and
output them as analog audio signal.
Group 3 :
The audio data CH 9 through CH 12 in SDI signal
which the DID is set to audio group 3 are detected and
output them as analog audio signal.
Group 4 :
The audio data CH 13 through CH 16 in SDI signal
which the DID is set to audio group 4 are detected and
output them as analog audio signal.
The analog audio signal is not output when no
corresponding audio data exists in SDI signal or when
no SDI signal is input.
S202-3
(GP SEL 2)
OFF
OFF
ON
ON
BKPF-105A/205/205R
BKPF-106A/206/206R