Sony 10001 설치 매뉴얼 - 페이지 7
{카테고리_이름} Sony 10001에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony 10001 28 페이지. A/v multiplexer board, a/v demultiplexer board
Sony 10001에 대해서도 마찬가지입니다: 설치 매뉴얼 (50 페이지)
페이지 인쇄
1-2. Information of BKPF-105A
1-2-1. Contents
Contents of BKPF-105A are as follows.
. AVM-6 board
. Connector panel (CN-1481 board) (1)
. Operation manual
. Installation manual
. Slot number label
1-2-2. Location and Function of Connectors
AES/EBU IN
WORD SYNC
SDI OUT
BKPF-105A
1-2-3. Connectors and Cables
If any connector or cable is connected to the connectors on the connector panel
when installing or servicing, use the connectors or cables listed below or equivalent.
BKPF-105A Connector
Panel Indication
Connector
SDI IN
BNC (75 Z)
AES/EBU IN
WORD SYNC OUT
SDI OUT
BKPF-105A/205/205R
BKPF-106A/206/206R
(1)
(1)
(1)
(1)
AVM
SDI IN
1
2
1
3
2
OUT
4
1
5
2
Matching Connector/Cable
Connector
BNC (75 Z)
BELDEN 8281 cable
1
1
1
1 SDI IN connector (BNC type):
1
Accepts a 4:2:2 component or 4fsc NTSC composite
serial digital video signal.
2
2
2
2 Active-through output connector (BNC type):
2
Outputs the signal supplied to the SDI IN connector
after its waveform has been shaped.
3
3 AES/EBU IN connectors (BNC type):
3
3
3
Accepts an AES/EBU digital audio signals.
Connector 1 : 1/2 CH (or 5/6 CH in group 2)
Connector 2 : 3/4 CH (or 7/8 CH in group 2)
n
Be sure to supply digital audio signals being locked to
the digital video signal. Otherwise, noise may occur.
4
4
4 WORD SYNC OUT connector (BNC type):
4
4
Outputs an audio word sync signal. This signal is
supplied only when a signal is supplied to the SDI IN
connector.
5
5
5 SDI OUT connectors (BNC type):
5
5
Outputs a signal obtained by multiplexing the audio
signals supplied to the AES/EBU IN connectors with
the serial digital video signals supplied to the SDI IN
connector and adding an EDH process to the
multiplexed signal.
Connector 1 and 2 output the same signal.
Sony Part No.
1-560-069-11
_
1-2. Information of BKPF-105A
1-3(E)