Sony 1080i 운영 매뉴얼 - 페이지 9
{카테고리_이름} Sony 1080i에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony 1080i 40 페이지. Digital camcorders: high definition camcorder
Sony 1080i에 대해서도 마찬가지입니다: 운영 매뉴얼 (40 페이지)
페이지 인쇄
Step 2: Charging the battery pack
4
Battery pack
You can charge the "InfoLITHIUM"
battery pack (H series) after
attaching it to your camcorder.
b Notes
• Your camcorder operates only with an
"InfoLITHIUM" battery pack (H series).
1
Connect the AC Adaptor to the
DC IN jack on the Handycam
Station.
Be sure that the v mark on the DC plug
is facing up.
2
Connect the power cord to the AC
Adaptor and the wall outlet.
3
Slide the POWER switch in the
direction of the arrow to OFF
(CHG) (the default setting).
4
Attach the battery pack by sliding
it in the direction of the arrow
until it clicks.
5
DC IN jack
DC plug
3
POWER
switch
1
/CHG lamp
2
AC Adaptor
Power cord
5
Set the camcorder onto the
Handycam Station securely.
The /CHG (charge) lamp lights up and
charging starts. The /CHG (charge)
lamp turns off when the battery pack is
fully charged. Remove the camcorder
from the Handycam Station.
To remove the battery pack
Slide the POWER switch to OFF (CHG).
Slide the BATT (battery release) lever and
remove the battery pack.
BATT (battery
release) lever
b Notes
• When you remove the battery pack or the AC
Adaptor, make sure that the
(Still) lamp (p. 11) is turned off.
5
To the
wall outlet
(Movie) lamp/
9