Sony BRC-300P 브로셔 및 사양 - 페이지 5
{카테고리_이름} Sony BRC-300P에 대한 브로셔 및 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony BRC-300P 16 페이지. 3ccd color video camera
Sony BRC-300P에 대해서도 마찬가지입니다: 브로셔 및 사양 (8 페이지), 브로셔 및 사양 (8 페이지), 사양 (8 페이지), 브로셔 및 사양 (8 페이지), 명령 목록 (23 페이지)
페이지 인쇄
Versatile Video Outputs
The BRC-300P can be used with a range
of versatile optional interface cards that
allow for flexible analogue and digital
system configurations. Choose from the
following interface cards for a solution
that meets your individual requirements:
■ BRBK-301*
1
Analogue RGB/Component
■ BRBK-302*
1
SDI
Thanks to these convenient options, the
BRC-300P truly functions as an all-in-one,
compact robotic camera.
*1 Can be installed into the both BRC-300P and
BRU-300P.
Ceiling or Desktop Mount
Installation
Thanks to Sony's Image Flip functions,
the BRC-300P can be ceiling-mounted
using the supplied ceiling mount kit or can
also be used on your desktop.
BRBK-302
Optional Board mounted on BRC-300P (rear)
MULTIPLE-CAMERA OPERATION FROM A REMOTE LOCATION
CCFC-M100
BRC-300P
CCFC-M100
BRC-300P
CCFC-M100
BRC-300P
CCFC-M100
BRC-300P
Six Presets
Various
camera
Pan/Tilt/Zoom and focus can be preset in
up to six presets per camera.
Multi-function IR Remote
Commander
Basic camera settings such as Pan/Tilt/
Zoom functions and six preset patterns
can be controlled from the supplied IR
Remote Commander.
Easy-to-use and Ergonomically-
designed Remote Control Unit
All
camera
Pan/Tilt/Zoom function and six preset
patterns can be controlled from the
optional RM-BR300 Remote Control Unit.
The ergonomic joystick design and
feature-rich control panel provide superb
operability in various remote-shooting
applications.
BRU-300P
Video Signal
Monitor
Monitor
Monitor
Monitor
settings
such
as
®
Unit
settings
including
the
BRBK-301 / BRBK-302
Optional Boards mounted on BRU-300P (rear)
Switcher
Tally Signal
(Contact closure)
RM-BR300
RS-232C/RS-422
Optical Multiplex Unit
With the optional BRBK-303 Optical
Multiplex
Card
and
the
BRU-300P Optical Multiplex Unit, uncom-
pressed digital data including external
sync and camera control can be transmit-
ted via the BRU-300P Optical Multiplex
Unit. With only a single cable connection
required between the camera and the
optical multiplex unit, the system is
extremely easy to install. The maximum
cable length between these units is 500
metres – allowing multiple cameras to be
located virtually anywhere you want.
What's more, the BRU-300P Optical
Multiplex Unit is equipped with two built-
in card slots identical to the ones found in
the BRC-300P camera allowing for flexible
analogue and digital system configura-
tions.
Projector
Video Cassette
Recorder
optional
5