Sony BRC-X401 매뉴얼

{카테고리_이름} Sony BRC-X401에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony BRC-X401 15 페이지. Srt introduction
Sony BRC-X401에 대해서도 마찬가지입니다: 명령 목록 (41 페이지), 기술 매뉴얼 (15 페이지)

페이지 인쇄

Manufacturer: Sony Imaging Products & Solutions Inc.

Model: BRC-X400/SRG-X series

Device Type: Camera

CONTACT SUPPORT:

COMPANY NAME:

SUPPORT CONTACT:

EMAIL ADDRESS:

NOTES:

GENERAL INFORMATION

SIMPLWINDOWS NAME:

CATEGORY:

VERSION:

SUMMARY:

GENERAL NOTES:

15 Volvo Drive · Rockleigh, NJ 07647

800.237.2041 / 201.767.3400

Sony Imaging Products & Solutions Inc.

Crestron driver support

[email protected]

Sony_BRC-X400_SRG-X_series

Camera

1.0

This module controls Sony BRC－X400, SRG-X series cameras by way of VISCA over

IP protocol.

Using the provided sample program, you will be able to control up to 2 cameras by

selecting the camera (either Camera1 or Camera2) in Camera selection menu in

[System] tab.

This program works with the following models of Sony network camera products.

BRC-X400, SRG-X400, SRG-X120, BRC-X401, SRG-201M2, SRG-X402, SRG-

HD1M2

Prior to building and transferring the firmware into the Crestron Control System, be

sure to set up the correct IP addresses of the camera in IP-ID-04 and IP-ID-05

UDP/IP Communications in Slot-07 of "Central Control Modules: DMPS3-4K-150C" in

the Program View of the SIMPL Windows project. Right click the UDP/IP

Communications object and then select "Configure devices ... (F6)", go into [IP Net

Address] tab and then put the correct camera IP address in the "Default Address"

fields (see below pictures).

For more information please contact our Crestron Application Market team at

[email protected]. The information contained on this document is privileged

and confidential and for use by Crestron Authorized Dealers, CSP Members, A+ Partners

and Certified Integrated Partners only. Specifications subject to change without notice.

http://application.market.com