Sony BVP-E30 series 매뉴얼 - 페이지 15

{카테고리_이름} Sony BVP-E30 series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony BVP-E30 series 34 페이지. Sdtv portable cameras
Sony BVP-E30 series에 대해서도 마찬가지입니다: 운영 매뉴얼 (36 페이지), 브로셔 및 사양 (14 페이지), 운영 매뉴얼 (38 페이지)

페이지 인쇄
Sony BVP-E30 series 매뉴얼
2-2-5. Notes When Confi guring System
Power supply to RCP
The power to the RCP-920/921 can be supplied via three methods of "PoE", "Via CCA-5 cable" and "Supplying power to
EXT I/O". A method of supplying power is automatically selected in the way that the power with the highest voltage has
priority.
When "PoE" is select to supply the power, calculate the power that can be supplied from the respective output terminal of
the equipment supplying power, and the total power that is required by each equipment. Use the equipment supplying
power that has the suffi cient power supply capacity. If another RCP is connected by the CCA-5 cable to an RCP that has
already been connected by PoE, total power may exceed the power supply capacity with PoE. Do not connect equipment in
such way.
PoE
HUB
LAN cable
Loop connection is prohibited
If two or more equipment that have already been connected to the same network are further connected each other by the
CCA-5 cable, a loop is created resulting in malfunction.
In the following connection, remove the CCA-5 cable, or remove the LAN cable from CCU/HDCU or RCP so that the
information transmission route should not create a loop.
Camera head
1
Fiber cable
Triax cable
Camera Network System
RCP
RCP
CCA-5 cable
CCU/HDCU
or
CCA-5 cable
LAN cable
LAN ca
RCP
LAN
LAN cable
HUB
2-7 (E)