DigiTech XC-0430 사용 설명서 - 페이지 15

{카테고리_이름} DigiTech XC-0430에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DigiTech XC-0430 18 페이지. Professional wireless rain gauge with 4” lcd
DigiTech XC-0430에 대해서도 마찬가지입니다: 사용자 설명서 (7 페이지)

페이지 인쇄

13. Data clearing

During installation of the wireless sensor, the sensor was likely to be triggered, resulting in

erroneous rainfall measurements. After the installation, user may clear out all the erroneous data

from the Display Main Unit, without needing to reset the clock and re-establish pairing.

1. Press and hold [ HISTORY] key for 8 seconds.

2. Press [UP ] or [DOWN] key to choose "YES" or "NO".

3. Press [HISTORY]

14. Maintenance of rain gauge

1. Rotate the rain collector in anticlockwise direction.

2. Gently remove the rain collector.

3. Clean and remove any debris or insects.

15. Troubleshooting

Problem / Symptom

Strange or no measurement of

Rain Sensor

Strange or no measurement of

Thermo Sensor

display on the outdoor

temperature display

and

(Signal lost for 15

minutes)

and

(Signal lost for 1 hour)

1. Check the drain hole in the rain collector.

2. Check the balance of the rain gauge.

1. Check the radiation shield.

2. Check the sensor casing.

1. Change new batteries to the rain gauge.

2. Relocate the main unit and sensor closer to each other.

3. Make sure the main unit is placed away from other

electronic appliances that may interfere with the wireless

communication (TVs, computers, microwaves).

4. If problem continues, reset both main unit and the sensor.

Solution