Sony DCR-PC109 - Digital Handycam Camcorder 애플리케이션 매뉴얼 - 페이지 33

{카테고리_이름} Sony DCR-PC109 - Digital Handycam Camcorder에 대한 애플리케이션 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony DCR-PC109 - Digital Handycam Camcorder 44 페이지. Limited warranty (u.s. only)
Sony DCR-PC109 - Digital Handycam Camcorder에 대해서도 마찬가지입니다: 사용 시 참고 사항 (2 페이지), 릴리스 노트 (2 페이지), 브로셔 (2 페이지), 제한 보증 (1 페이지)

페이지 인쇄

Connecting an analog

VCR to the computer

via your camcorder

— Digital convert function

: Signal flow

Notes

• Some models are not compatible for this operation.

Regarding supported models, check to see if there is

a listing for the Digital convert function in the index

of the Camera Operations Guide.

• The supplied A/V cable varies depending on the

model. Refer to the separate Camera Operations

Guide supplied with your camcorder with the

operations guide of the analog video unit

You can convert an analog signal output from

an analog device such as a VCR to a digital

signal and transfer it to a digital device, such as

a computer, via your camcorder.

Software that can capture video signals must be

installed on the computer.

DV Interface

to i.LINK (IEEE1394)

connector

A/V connecting cable

(supplied)

A/V (audio/video)

jack

i.LINK cable (optional)

(White)

(Red)

AUDIO/VIDEO

jacks

VCR (analog)

Before operation

Set [DISPLAY] in the menu settings to [LCD

PANEL] (the default setting).

Turn on the analog video unit.

Slide the POWER switch repeatedly to

select the PLAY/EDIT mode.

Use the supplied AC Adaptor as the power

source.

The name of the power switch on the

camcorder varies depending on the model.

Set [A/VtDV OUT] in the menu

settings of your camcorder to on.

(Yellow)

S video

plug (Black)

,continued

Other functions