Argo LARI-8K 사용 설명서 - 페이지 4

{카테고리_이름} Argo LARI-8K에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Argo LARI-8K 20 페이지.

 Do not use the plug as a means by which to start/stop the air

conditioner: use the ON/OFF button on the remote control or on the

control panel.

 Do not install the air conditioner in rooms where it may receive

water splashes (e.g. laundry rooms).

 Before moving or cleaning the device, ensure that it is unplugged

from the socket.

 Do not move the air conditioner while it is operating; first turn the

appliance off, check for any condensate build-up and empty it if

necessary.

 To turn the appliance off, set the remote control to OFF and remove

the plug from the socket. Pull on the plug only. Do not pull the cord.

 Do not use the appliance if the cord or plug are damaged. If the

power supply cable is damaged, it must be replaced by the

manufacturer or its technical assistance service or in any case by a

person with similar qualifications, in order to prevent any risk.

 The appliance must be installed in compliance with national wiring

regulations.

 Keep the unit away from fire, possible fire sources, inflammable or

explosive objects.

 Do not leave the unit unattended while it's operating, turn the unit off

and unplug it.

 If drainage hose is used, the ambient temperature musnt't be lower

than 0°C. It can cause water leakage to the air conditioner.

 Do not splash or pour water on the air conditioner

PRECAUTION!

 Do not insert any objects into the air conditioner: this is very

dangerous as the fan turns at high speed.

 Ensure that air circulates freely around the unit. Do not cover

the air intake and delivery grilles with drapes or any other

means.

V 12/21