Cisco UC500 series 구성 매뉴얼 - 페이지 15

{카테고리_이름} Cisco UC500 series에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UC500 series 50 페이지. Sip trunking unified communications 500 series

4.3.6 In this setup – there is a single phone connected to the UC500. To configure the

UC500 – click on

"Configure"

Figure 4.3.6 Left pane showing Configure options

The configuration elements that need to be modified or kept at default from now on are

defined per the VAR / customer. The focus for now will be on common SIP Trunk

configuration features that need to be changed.

"Smartports"

configuration option allows changing data and voice VLAN assignments

from the recommended defaults that are assumed in this document to something else.

"Ports"

allows the assignment of static duplex and speed settings, power management,

and enablement.

"Security" allows the creation or modifications of NAT, VPN server and Firewall

options. This will not be addressed in this document but are discussed in the UC500

product documentation.

"Telephony"

is where the majority of configuration for SIP Trunking takes place, and

will be addressed in the next section of this document.

Cisco recommends that VARs leave the "Switching", "Routing", "Smartports" & "Ports"

portions at their default settings unless integration into the provider network requires the

addition of IP interfaces, VLANs or static routing decisions etc.

on the Left pane – this should show up as below: