Argo LUDVIG 사용 설명서 - 페이지 4

{카테고리_이름} Argo LUDVIG에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Argo LUDVIG 20 페이지.

• Before moving or cleaning the device, ensure that it is unplugged from

the socket.

• Do not move the air conditioner while it is operating; first turn the appliance

off, check for any condensate build-up and empty it if necessary.

• To turn the appliance off, set the remote control to OFF and remove the

plug from the socket. Pull on the plug only. Do not pull the cord.

• Do not use the appliance if the cord or plug are damaged. If the power

supply cord is damaged, it must be replaced by the manufacturer,

dealer or a similarly qualified person so as to avoid any safety risks.

• Keep the unit away from fire, possible fire sources, inflammable or

explosive objects.

• Do not leave the unit unattended while it's operating, turn the unit off

and unplug it.

• If drainage hose is used, the ambient temperature musnt't be lower than

0 °C. It can cause water leakage to the air conditioner.

• Do not splash or pour water on the air conditioner

PRECAUTION!

• Do not insert any objects into the air conditioner: this is very dangerous

as the fan turns at high speed.

• Ensure that air circulates freely around the unit. Do not cover the air

intake and delivery grilles with drapes or any other means.

WARNING!

• The air conditioner must be positioned at least 50 cm from the wall or

any other obstacles, on a flat and stable surface so as to avoid water

leaks.

• The air conditioner is fitted with a system for protecting the compressor

from overload. This means that the compressor only starts 3 minutes

after its previous stoppage.

• Please wait at least 3 minutes before starting the unit. This helps prevent

the compressor from being damaged.

WARNING!

In the event of an anomaly, switch the appliance off and unplug it from

the socket. Do not dismantle or attempt to repair or modify the product.

V 04/23